Dosatron for Car Wash Industry
Dosatron for Car Wash Industry
Dosatron is a non-electric water-powered dosing (metering) pump. It is used for proportional dosing and mixing of water-soluble oils like Cutting Oil, Grinding Oil, Die-Casting Lubricant, Surface Treatment, etc.
- Water Powered
- 100% Proportional
- Maintenance Free
Coolant Management | Industrial Washing | Water Treatment | Offset Printing | Irrigation
Make Dosing easy, effective & consistent with Dosatron (How will it help you?)
A pioneer in proportional dosing without electricity, Dosatron technology meets the requirements of today’s various washing technologies (tunnel, gantry, high pressure, and manual washing). Thanks to its simplicity of installation and use, ease and low maintenance cost, as well as compatibility with most of the additives used on the market, Dosatron technology contributes to optimizing operating costs, in a context where they are a major decision-making criterion in the design and use of installations.
Custom Panel Installation
Dosatron also offers Custom Panel Installations that can help organize your equipment room to help minimize chemical leaks and maintenance costs. The space-saving designs eliminate the need for stock tanks and air pumps. Using fewer pieces of equipment means fewer problems and more usable area in your supply room.
Unlike venturi systems, Dosatron products have no orifices to block or replace. Installation is simple, and our external adjustment stems allow you to fine-tune your chemical dilution rate on the fly for optimal results. And since they require no electricity to operate, Dosatron chemical dispensers can also help reduce your car wash’s environmental impact for a greener operation.
Dosatron chemical dispensers are the perfect solution for vehicle washes of all types and sizes, from self-serve, tunnel, and in-bay automatic car washes, to truck, bus, train, and aircraft washes.
Installed directly in the water supply line, the Dosatron operates by using the flow of water as the power source. The water activates the Dosatron, which takes up the required percentage of oil directly from the container and injects it into the water. Inside the Dosatron, the concentrate is mixed with the water, and the water pressure forces the solution downstream. The dose of concentrate will be directly proportional to the volume of water entering the Dosatron, regardless of variations in flow or pressure, which may occur in the mainline.
1. When water enters the pump, it triggers the hydraulic motor, which begins moving up and down inside the body of the pump.
2. As the piston moves up and down, the plunger, connected to the bottom, cycles in a vertical stroke.
3. In up and down strokes, chemical concentrate is dosed into the moving water stream providing a consistent and repeatable solution.
|Injection range||0.05% – 25%|
|Water flow range||700 Ltr./hour – 20,000 Ltr./hour|
|Operating water pressure||0.5 Bar – 10.0 Bar|
|Concentrated additive injection||0.02 – 60 l/h|
|Material Used||Polypropylene, Polyamide, Polyethylene, PVC, Hastelloy.|
|Catalogue (PDF)||Download Here|